blogging the latest news and technology for
sustainable construction and net zero energy

Showing Tag: "sustainable construction" (Show all posts)

Choosing a Low-E Window

Posted by John Noriega on Saturday, March 31, 2012,


In a recent post, we explained the benefits of using DIY low-emissivity coatings to insulate your current windows at the fraction of the cost of replacing them.  But if you are designing a new sustainable building or home and have the opportunity to select your windows from the cutting edge options available today, these general guidelines will help you make logical decisions.
There is a true science behind low-e coatings that bares the necessity of mentioning that no two low-e coatings a...


Continue reading ...
 

Commercial Warehouse Energy Retrofits

Posted by John Noriega on Sunday, March 18, 2012,

One type of building that does not often get mentioned in energy conservation discussion is commercial warehouses and storage facilities.  In order to conserve energy in these spaces it is important to identify defficiencies.  These buildings are unique in that the inhabitants do not desire typical interior temperatures, however, some products and materials held in warehouses require to be stored at a certain climate.  For this reason heating and cooling loads can still be a large contributor...


Continue reading ...
 

Sustainable Facility Management Software

Posted by John Noriega on Tuesday, February 28, 2012,

-- Recent developments in technology strive to induce an energy efficient mindset to the occupants of sustainable buildings.

Since early 2010, there has been alot of discussion about
net zero energy buildings on the Sustainable Construction Blog.  It is evident that sustainable construction technologies have greatly advanced over the past few years; making net zero energy a viable goal for new construction projects. 

However, one very important aspect is often not emphasized enough when discus...


Continue reading ...
 

5 Components of a Net Zero Energy Building

Posted by John Noriega on Friday, February 10, 2012,

--Unfortunately, there is not a recipe for constructing a net zero energy building, but these guidelines provide a fundamental basis of how net zero energy is acheived through smart design and innovative technologies.

Alternative Energy Source

Alternative energy can come from a variety of sources: solar, wind, geothermal, and biomass.  These renewable energy sources can be harnessed in a variety of ways to provide power, heating, and cooling to a building and lower supplemental consumption by t...


Continue reading ...
 

Tendril Connect Energy Management

Posted by John Noriega on Monday, April 11, 2011,

--New energy management technology helps connect smart, sustainable buildings to utility companies; the Tendril Connect offers energy savings on a whole new level.

The Tendril Connect platform utilizes the Tendril Smart Grid at a residential level to bring successful energy management to property owners.  This aspect is the cornerstone of Tendril’s attempt to develop the “Energy Internet.”  The Energy Internet gathers knowledge on energy consumption and trends from the local grid to help...

Continue reading ...
 

How R-Values are Measured

Posted by John Noriega on Tuesday, March 8, 2011,
In sustainable construction, one of the most proven and sought after energy reducing techniques is superinsulating in new construction or retrofitting an old building with more efficient or additional insulation.  When installed correctly, insulation is very effective in reducing energy loads on HVAC systems by keeping a more regulated and constant indoor temperature.  There are many types of insulation ranging from spray foam, to loose-fill batt, to rigid EPS, and choosing which one to use c...
Continue reading ...
 

Recycled Aggregate for Carbon Neutral Concrete

Posted by John Noriega on Thursday, January 27, 2011,

    With the development of environmentally conscious construction projects across the world, there are still many demands of building materials that today’s technologies have not yet satisfied.  Looking at the two main structural building materials, steel and concrete, one in particular lacks characteristics of carbon neutrality.  While steel is nearing full recycled production, concrete remains a very carbon intensive process.  The main contributor to this trait is portland cement.  Port...


Continue reading ...
 

A Sustainable Construction Outlook for 2011

Posted by John Noriega on Saturday, January 8, 2011,
2011 buzzwords: net-zero energy, passive house, and photovoltaic.

As we bring in the New Year, there are several trends that will define the construction industry in 2011.  As in recent years, the industry is undoubtedly headed in a sustainable direction focusing on environmentally friendly materials, energy efficiency, and alternative energy sources.  The outlook for the industry in 2011 considers these same principles, but we will see a stronger more informed focus in several areas.

Achievin...
Continue reading ...
 

AECOM: A Leader in Sustainable Planning

Posted by John Noriega on Thursday, July 29, 2010,

Sustainability in construction is a concept that can be accepted into a project to various extents.  In addition, the sustainability of a building can only be taken as far as the site and surround area allow.  This means a building can have all of the right energy efficient systems, building envelopes, and green materials but still may not provide a sustainable lifestyle or community to the people living, working, or visiting these buildings. 

This is where AECOM makes a difference in the s...


Continue reading ...
 

Sustainable Construction Photos at the 2012 Olympics

Posted by John Noriega on Sunday, July 18, 2010,

As London prepares to host the Summer Olympic Games of 2012, recent construction photos share the progress being made in this sustainable project.  This sustainable planning and construction project will develop an area that is economically depressed to provide for the community for many decades after the 2012 Olympic Games are over.  Photos courtesy of london2012.co.uk

Velo Park

Aquatic Center

Olympic Village


Continue reading ...
 

The Solana Project for sustainable energy

Posted by John Noriega on Tuesday, July 6, 2010,

The project focuses on developing one of the world’s largest solar power plants in Gila Bend, Arizona.  The facility will use renewable energy sources to provide a gross output of 280-MW, and supply 70,000 homes with power.


 Treehugger.com



Who’s involved?  

Abengoa Solar:  Develops power plants using several applications of solar power technology

APS:  Leading producer of electrical power in Arizona

Dept. of Energy:  Recently agreed to invest almost $1.5 billion dollars in Abengoa ...


Continue reading ...
 

Dow Corning sustainable insulation solutions

Posted by John Noriega on Friday, July 2, 2010,



You have probably seen commercials and internet ads for the ‘Human Element’ campaign (Hu).  This campaign represents the commitment to sustainability and the future of human life by the Dow Chemical Company.  Dow has established a Sustainability 2015 Goals report that is responsible for dedicating their company’s research and development to new products that will help advance the building industry with correspondence to the government’s energy efficiency goals.

Their interest in su...


Continue reading ...
 

Dynamic Windows: Soladigm awarded $3.47 million

Posted by John Noriega on Wednesday, June 30, 2010,



Windows are undoubtedly one of the greatest sources of heat transfer in a building.  New electrochromic, switchable window technology is a recently patented high-tech solution to this prominent building deficiency.    It may seem like something out of a sci-fi movie but switchable windows are sure to be a popular sustainable building technology in years to come. 

As part of the DOE’s $76 million dollar funding, Soladigm Inc. was awarded $3.47 million.  Soladigm is a company based out of...


Continue reading ...
 

RETScreen: software for sustainable projects

Posted by John Noriega on Friday, June 25, 2010,



Clean, renewable energy and efficient technologies (RETs) for heating, cooling and power have been developed and are now ready for use in sustainable construction around the world.  However, we must first understand where it is necessary and what technologies can effectively be used.  While loading up a building with every new renewable, energy efficient technology may seem sustainable, in contrast it is not.  To make a sustainable building as efficient as possible, a design approach must b...


Continue reading ...
 

Passive House vs. LEED Standards

Posted by John Noriega on Wednesday, June 16, 2010,

 



The most popularly used sustainable building standard in the United States is the USGBC’s LEED certification.  Its role in the construction industry has become well respected by professionals and offers designers, engineers, construction managers and contractors some consistency in developing aspects of a changing industry.  In other words, these professionals are driven to become familiar with new sustainable construction methods and techniques that are required in order to achieve g...


Continue reading ...
 

BIM Software for Sustainability

Posted by John Noriega on Friday, June 4, 2010,



--Designing sustainable buildings

Advancements in software technology have led a new architectural drafting revolution.  Building Information Modeling (BIM) software provides an innovative approach to developing a set of construction drawings for a building.  Compared to CAD, the BIM software essentially creates a drawing for the user according to the provided input, hence the name, ‘information modeling.’  There are many additional advantages that BIM has over CAD software. 

In gene...


Continue reading ...
 

World leaders of sustainable construction

Posted by John Noriega on Sunday, May 30, 2010,

As the U.S. seems to be leading the world in many political aspects, how does their sustainable infrastructure rank against the rest of the world?  The truth is the United States is far behind other countries in terms of sustainable design and construction.  Many leading countries including Sweden, the United Kingdom, and Ireland are home to corporations developing the latest and greatest innovations in the sustainable construction industry

Why is the U.S. behind?  I think it has ...


Continue reading ...
 

New Meadowlands Stadium: A sustainable standard (Part 2)

Posted by John Noriega on Thursday, May 20, 2010,



Choosing sustainable materials to build with and cutting back energy consumption only goes so far when creating a sustainable building.  There are several other aspects to be considered when taking on a project as large as a stadium and labeling it a green facility. In order to achieve full sustainability as a goal, the engineers and designers had to make many careful design and construction choices based on site location. 

Site Sustainability

One of the most challenging aspects...


Continue reading ...
 

New Meadowlands Stadium: A sustainable standard

Posted by John Noriega on Wednesday, May 19, 2010,


The EPA helped the owners select the most sustainable interior materials

The new Meadowlands Stadium in Rutherford, NJ has recently been completed, and is ready to host events this summer.  The quality of the building amenities is supported by the combined capital of the two professional football teams that call the Meadowlands their home.  What a perfect opportunity to create the most sustainable stadium in the NFL.  When the administrations of the NY Jets and NY Giants teamed up with the U...


Continue reading ...
 

Structural Steel: A century old sustainable building material

Posted by John Noriega on Friday, May 7, 2010,



The New York Times Tower is made of 25,000 tons of steel; 95% of which is recycled.

Since the 20th century, steel has been ever-changing the construction industry; bringing remarkable architectural designs to life.  One of the most valued benefits steel has brought to the construction industry is its level of sustainability.  Since the early 1970’s, the North American steel industry has been investing a lot of money into becoming a more sustainable industry.  Half of the world’s stee...


Continue reading ...
 

Why Sustainability is in Demand

Posted by John Noriega on Friday, April 23, 2010,

Sustainable construction advantages are based on innovations that correct the defficiencies of traditional building practices.  Here are several reasons why sustainability is in demand.

First off, ¼ of the world’s virgin wood is used for construction.  This, in addition to mining, contributes to deforestation and eventually flooding and siltation.  These processes destroy ecosystems that are home to many plants and animals.


Also, a major issue with standard building construction is its d...


Continue reading ...
 

Welcome to the Sustainable Construction Blog!

Posted by John Noriega on Sunday, April 18, 2010,
This website will cover many interesting aspects of sustainable construction practices as new products and technology are implemented into the construction industry.  Follow along as breaking news stories and products are analyzed and reviewed.  This blog was created by Architectural Engineering student John Noriega in order to interact with other professionals in the industry and discuss sustainable construction.  The blog is also made to appeal to America's homeowners as it will discuss the...
Continue reading ...
 
 

John Noriega © 2012 Sustainable Construction Blog.   Blogging the latest news and technology for sustainable construction and net zero energy.

Make a Free Website with Yola.